Construction Chemicals
Repair & Protection
Mapegrout Patch 218
General purpose, shrinkage-controlled, fibre-reinforced, patch repair mortar
Packaging : 25 Kg/Bag
Consumption :18.3 kg/m2 of Mapegrout Patch 218 powder per 10 mm of thickness
DATASHEET:
epojet lv
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces.
Packaging : 4 Kg/Set ( A - 3.2 Kg , B - 0.8 Kg )
Consumption : 1.1 Kg/Litre of cavities
DATASHEET:
mapefer 1k
One-component, anti-corrosion cementitious mortar for steel reinforcement rods.
​
Packaging : 5 Kg/Bag
Consumption : 100 g/m for 8 mm diameter rebar (2 mm of product applied)
DATASHEET:
Eporip
Two-component solvent free epoxy adhesive, for sealing cracks in screeds.
​
Packaging : 2 Kg/Set ( A = 1.5 Kg ,
B = 0.5 Kg )
​
Consumption : 2 Kg for 1.5 sqm at 1mm thickness
DATASHEET:
adesilex pg2 sp
Two-component thixotropic epoxy adhesive for structural bonding.
​
Packaging : 5kg/Set (A = 3.75kg, B = 1.25kg)
Consumption : 1.50-1.60 kg/sqm per mm of thickness.
​
DATASHEET:
mapefill 318
Pumpable, multi-purpose, non-shrinkage, cementitious grout
​
Packaging : 25 Kg/Bag
Consumption :75 bags for 1 cbm
​
​
DATASHEET:
APT NS Grout
Premium, super flow, high-strength, non-shrink, cementitious grout
​
Packaging : 25 Kg/Bag
Consumption : 75 bags for 1 cbm
​
DATASHEET:
Planicrete SP
Multipurpose latex additive for mortar and cementitious adhesive
​
Packaging : 25 Kg/Pail and 5 Kg/Pail
Consumption : 25 Kg for 83 sqm
DATASHEET:
Waterproofing
mapelastic
Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.
​
Consumption:
– trowel: 1.7 kg/m² per mm of thickness;
– spray: 2.2 kg/m² per mm of thickness.
Packaging:
– 32 kg units: 24 kg bags + 8 kg tanks;
DATASHEET:
mapelastic foundation
Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.
​
Consumption:
– by roller: 1.65 kg/m² per mm of thickness;
– by spray: 2.2 kg/m² per mm of thickness.
Packaging:
32 kg kits:
– component A: 22 kg bags;
– component B: 10 kg tanks.
DATASHEET:
mapenet 150
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.
​
Colour: blue.
Weight: 150 g/m² ± 5%.
Mesh size: 4x4.5 mm.
Packaging: 50 m x 1 m rolls.
DATASHEET:
planiseal 288
Two-component cementitious mortar for waterproofing underground structures, tanks and concrete structures in general.
​
Consumption:
Approx. 1.9 kg/m² per mm of thickness.
Packaging: 25 kg kit
component A: 20 kg bag; component B: 5 kg canister.
DATASHEET:
PLAstimul MY
Plastimul MY is a water-emulsified, thixotropic, bituminous coating which dries to form a flexible, plastic membrane that is resistant to re-emulsification.
​
Plastimul MY is resistant to aggressive agents present in the soil and to mild acids and alkalis.
Consumption:
0.3-1.0 litres per m2 per coat.
Packaging:
available in 20-litre pails
DATASHEET:
Aquaflex roof MY
Ready-to-use, flexible, liquid-applied, seamless membrane for waterproofing of exposed surfaces
​
Consumption:
0.3 kg/m² for priming coat. 0.5 – 0.6 kg/m² per neat coat.
​
Packaging: 7 kg & 25 kg pails.
DATASHEET:
Mapelastic SMart
Two-component, high flexibility cementitious mortar, for waterproofing concrete surfaces, balconies, terraces, basins, and swimming pools. Can be applied by brush or with a roller.
​
Packaging : 30 kg kits (part A 20 kg part B 10 kg).
Consumption :
approx. 1.6 kg/m2 per mm of thickness when roller or brush applied;
approx. 2.2 kg/m2 per mm of thickness when spray applied.
DATASHEET:
mapeband
Waterproofing corners between adjacent walls and between walls and floors before treating with cementitious waterproofing materials.
​
Packaging : · 50 m rolls of
120 mm total width.
DATASHEET: